Industrial & warehousing
Long-run backbone links across warehouses, yards and plant - distances and electrical noise that copper cannot cover, delivered on single-mode fibre.
Spliced for the loss budget. Certified, not assumed.
There is a difference between fibre that lights up and fibre that meets its loss budget. We install to the second standard and prove it.
Fusion spliced, not field crimped
Every joint fusion spliced.
Mechanical splices and field-polish connectors have their place, and it is not in your backbone. We fusion splice with core-alignment equipment, inspect and clean every connector end-face before mating, and manage fibres in trays with bend radius respected - because the difference between a 0.02 dB splice and a 0.3 dB one decides whether a long link works at all
Tested and documented
Handover means test results, not a handshake.
Every fibre we install or repair is OTDR traced and loss tested in both directions, with results compared against the calculated loss budget for the link. You receive labelled schedules, traces and insertion loss reports at handover - so when a network integrator, certifier or head contractor asks for evidence, it already exists.
Security and network in one contractor
The same contractor that installs your security.
Most of the fibre we install carries CCTV, access control and building networks - so we design the fibre and the systems on it together. One contractor runs the link, splices it, certifies it and commissions the cameras on the other end. When something doesn't perform, there is no gap between the cabling contractor and the security contractor to argue across
